23
Maintenance
Service Schedule
MAINTENANCE
BEFORE
EACH WORK
PERIOD
AFTER EACH
WORK
PERIOD
50 HRS 100 HRS 200 HRS
Check water level of batteries after
charging; add distilled water if necessary
(Wet cell only)
*
Check that the vacuum box lid seals
tightly
*
Check for damaged or worn tires. *
Check brushes for proper installation. *
Check vacuum hose connections. *
Check hoses for debris buildup. *
Check pedal(s), brake and steering for
proper operation
*
Clean brushes and check wear. *
Remove bearing cap from end of brush.
Clean bearing and cap.
*
Empty debris tray *
Check vacuum bag fullness and change if
necessary.
*
Charge batteries. *
Clean off top of batteries. *
Check battery cells with hydrometer. (Wet
cell only)
*
Check battery connections are tight. *
Clean battery cases and compartment. *
Inspect and replace all filters including
exhaust, intake, and microfilters.
*
Check brake. *
Check all motors for carbon brush wear. *
Check motor commutators. *
Check steering chain tensioner. *
Check brush deck ATV guard rods for
excessive wear.
*
Check wiring and other electrical compo-
nents for frays, heat discoloration,
cracked or hardened insulation, broken or
loose connections, and other defects.
*
8.641-374.0 operator’s Manual - chariot 3 - cv86/1 RS bp
To Next Page
Loading...
Need help?
General
