43
Maintenance
Electric Brake Engagement
FOR SAFETY: Before leaving or servicing machine,
stop on a level surface, turn off machine and
remove key.
Electric Brake Engagement
This machine is equipped with an electric brake.
The brake automatically engages and keeps the
machine from moving whenever the operator steps off
the platform or when emergency stop is engaged.
The brake has a mechanical over-ride that can be
engaged so machine can be pushed or towed (slowly).
To disengage brake:
1. Pull lever away from brake housing.
2. Insert material to hold brake lever away from brake
housing.
Do not operate machine with brake disengaged.
N'actionnez pas la machine avec le frein désen-
gagé.
Drive Motor Carbon Brush Replacement
Do not use a pressure washer to clean around the
motors. Use tap pressure only.
N’utilisez pas de nettoyeur haute pression pour
nettoyer autour des moteurs des brosses. Utilisez
seulement la pression du robinet.
FOR SAFETY: Before leaving or servicing machine,
stop on a level surface, turn off machine and
remove key.
1. Disconnect batteries from machine.
2. Remove right bumper.
3. Remove brush caps from motor housing.
4. Remove brushes.
5. Reverse process to reassemble with new brushes.
8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp
To Next Page
Loading...
Need help?
General
