Maintenance9403−5/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
26/ 37
94583 1 Pipe
for pressure built-up in fuel rail
during commissioning
X = 431 mm
015.674/07
94584 1 Lifting plate
for removal and fitting of injection
control unit,
including 4 screws M10x25
X = 88 mm
(max. lifting capacity 180 kg)
015.675/07
94587 8 Conical plugs (4 pieces per Cyl.)
for servo and fuel oil returns in rail unit
X = 20 mm
X
011.976/04
94589 2 Withdrawing tools
for removing lip seal from injection
control unit
X = 310 mm & 638 mm
X
012.308/04
X
94651C 1 Trolley
(WLL 1000 kg)
009.995/02
94652 2 Centring studs M16
for removal and fitting of electric motor
on auxiliary blower
X = 340 mm
000.427/93
X
2014-01
Standard Tools
To Next Page
Loading...
