Maintenance
Group1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
1/ 3
Bedplate and Thrust Bearing: Checking the Foundation Bolts 1112−1/A1.................
Main Bearing
− Loosening and Tensioning of Elastic Studs 1132−1/A1..............................
− Removal and Fitting of a Main Bearing 1132−2/A1.................................
Thrust Bearing
− Checking the Axial Clearance 1203−1/A1.........................................
− Removal and Fitting the Thrust Bearing Pads 1224−1/A1............................
Engine Stays with Friction Shims: Checking the Pre-tension 1715−1/A1..................
Tie Rod: Checking the Pre-tension and Tensioning the Tie Rods 1903−1/A2..............
Bed
late and Tie Rod Grou
1
Winterthur Gas & Diesel Ltd. RT−flex58T−E / MM / 2013
To Next Page
