Maintenance
1132−2/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
5/ 14
0
⇒ Remove manual ratchet ’H1’.
⇒ Install eyelet 94120 to lifting device 94111.
⇒ Lift bearing cover 2 out of crankcase b
means of manual ratchet ’H2’ with rope
94120G and manual ratchet ’H4’.
⇒ Carefully put the bearing cover in horizontal
position on wooden underlay ’WU’. Make
sure the protruding bearing shell does not ge
damaged.
G
H2
H4
94120
WU
2
10
FUEL SIDE
94120G
WCH01010
Removal and Fitting of a Main Bearing
V2 / 2013
To Next Page
Loading...
