English
10
C535
Cleaning the lters
Use a vacuum cleaner or soft brush
to clean the Pre-Filter.
• If it is excessively soiled, rinse in
room temperature water.
• Do not use detergent or soap.
• Allow the lter to dry for 24 hours
or more before using.
• Intervals between lter cleaning
may vary depending on the air
quality.
Cleaning the Exterior & Interior
Wipe with a soft damp cloth
using room temperature water.
• Afterwards, wipe it down with a
clean dry cloth.
• To keep unit in peak condition,
clean every 1-2 months.
Open the front panel and clean
the interior with a vacuum cleaner.
• For optimal performance, clean
every 1-2 months.
CLEANING CARE
NOTICE
- When cleaning the unit, always unplug the power cord first
and then wait until the unit has cooled down.
- Never disassemble, repair, or modify this unit yourself.
- Do not use ammable sprays or liquid detergents.
- Do not allow children to clean or maintain the unit.
- Before cleaning or maintaining, ensure unit is unplugged.
NOTICE
- Do not use benzene, alcohol, or other volatile uids,
which may cause damage or discoloration.
- Do not use hot water over 104
o
F or volatile uids such
as paint thinner.