SECTION 3 –
DRIVING YOUR MOTOR HOME
3-24
Propping the Bed Board
NOTE: When supporting the bed with a suitable
prop item (e.g. 6-ft. long 2x4 board),
make sure that the top of the board is
seated firmly against the aluminum tube
at the top of the bed board and make sure
the bottom of the board is seated firmly
against the steel frame on the floor for
security.
ENGINE TOP ACCESS COVERS
– REAR BATH MODELS
These covers are only removed if a complete
view of the engine is needed for inspection, or for
replacement or adjustment of upper engine parts.
The engine top covers are located beneath the
rear bath floor and lavatory cabinet, depending
on model.
Take precautions to protect carpet and interior
furnishings when removing engine covers. The
undersides of the engine covers could contain
Sliding
Step
Cover
Steel Frame
-Typical View
Step Cover
Steel Frame Screw Locations
-Typical View
Aluminum Tube
Steel Frame
To Next Page
Loading...
Need help?
General
