SECTION 4 -
APPLIANCES AND SYSTEMS
4-8
REAR AIR CONDITIONER
POWER SELECTOR SWITCH
–If Equipped
(models with 2 roof air units only)
If you want to run the rear AC unit, you must
switch the Rear A/C Selector switch to the proper
power source.
• If you are using the shoreline, the switch must
be in POWERCORD position.
• If you are using the generator, the switch must
be in GENERATOR position.
The rear air conditioner will not operate if the
switch is not in the proper position for the power
source being used.
NOTE: The power cord must be plugged into the
generator receptacle for generator
operation.
To Next Page
Loading...
