Name: Winnebago VIEW 24D
Brand: Winnebago
Rating: 5 (1 reviews)

To Next Page

To Previous Page

9-5

SECTION 9 –

FURNITURE AND SOFTGOODS

Once the table is reattached to the table leg

tube, tighten the handle completely then back off

approximately 1/2 turn. Periodically repeat this

adjustment procedure to ensure that it is properly

adjusted.

DINETTE/BED CONVERSION

–If Equipped

(Typical View – Your coach may differ in

appearance)

Dinette to Bed

1. Remove both dinette back cushions and set

aside.

2. Lift both dinette seat cushions upward.

3. Release the table leg from the floor support

bracket.

4. Release the catch on the table leg brace and

fold the leg up against the bottom of the table.

5. Remove the table from the wall support

bracket by lifting the end of the table.

Floor

Support

Bracket

Table Leg

Catch

Table

Bracket

Wall

Support

Questions and Answers:

Need help?

Do you have a question about the Winnebago VIEW 24D and is the answer not in the manual?

Winnebago VIEW 24D Specifications

General