Name: Winnebago VIEW 24D
Brand: Winnebago
Rating: 5 (1 reviews)

To Next Page

To Previous Page

9-9

SECTION 9 –

FURNITURE AND SOFTGOODS

5. Install seat back cushion (stored beneath front

dinette cushion).

6. Remove dinette table and pedestal leg from

rear wardrobe cabinet.

7. Insert dinette pedestal leg into metal receiver

in the floor.

NOTE: Slideout must be extended to access the

metal receiver.

8. Place dinette table onto the pedestal leg,

ensuring the receiver on the bottom of the

table is fully seated on the pedestal leg.

NOTE: The driver seat may be rotated for

additional dinette seating. Refer to the

chassis manual provided in your

InfoCase for further information.

9. Reverse steps to store dinette.

MURPHY BED

(Typical View – Your coach may differ in

appearance)

Murphy Bed

1. Lift bed support legs upward until it locks into

position.

Seat Back Cushion

Storage Location

NOTICE

Stow furniture extension before retracting

slide rooms.

WARNING

Keep people away from operating

mechanism and pinch hazard areas

during use. Failure to do so could cause

injury.

Questions and Answers:

Need help?

Do you have a question about the Winnebago VIEW 24D and is the answer not in the manual?

Winnebago VIEW 24D Specifications

General