Winnebago VIEW 24D User Manual

2-15
SECTION 2 –
SAFETY AND PRECAUTIONS
• Once the vehicle is prepared for stylized
wheel installation, use the chrome washer,
chrome lug nut, and chrome adapter with lug
wrench to re-install the stylized chrome
wheel.
Further Information
See the chassis manufacturer’s user guide
provided in your InfoCase for complete
instructions and re-torque information.
WHEELS – STYLIZED
ALUMINUM
(Mercedes-Benz
®
Sprinter Chassis)
–If Equipped
The Alloy Wheels, hub covers, and push on
nut covers are mounted with the chassis supplied
lug nuts which are concealed by push on nut
covers.
Note: Reference the chassis manufacturer’s user
guide provided in your InfoCase for
complete instructions and cautions on
changing a wheel.
• Before removing lug nuts, remove the push on
nut covers. To make the removal process less
challenging, it is recommended that you wrap
each individual jaw of pliers with electrical
tape or use a commercial lug nut cover
removal tool (not provided).
Further Information
See the chassis manufacturer’s user guide
provided in your InfoCase for complete
instructions and re-torque information.
WARNING
DO NOT operate the vehicle with less
than all 6 nuts installed and properly
torqued.
Stylized Aluminum Wheel
Remove the push on nut covers.

Winnebago VIEW 24D Specifications

General

Width	7'6"
Interior Height	6'8"
GVWR	11, 030 lbs
Fuel Type	Diesel
Sleeping Capacity	4
Make	Winnebago
Model	VIEW 24D
Chassis	Mercedes-Benz Sprinter
Horsepower	188 hp
Torque	325 lb-ft
Wheelbase	170"
Exterior Width	7'6"
Transmission	7-speed automatic
Engine	3.0L V6 Turbo Diesel
Grey Water Capacity	41 gallons
Black Water Capacity	41 gallons
GCWR	15, 250 lbs
Fuel Capacity	24.5 gallons