Name: Winnebago VIEW 24D
Brand: Winnebago
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SECTION 3 –

DRIVING YOUR MOTORHOME

3-10

4. Using the cap tool as a remote handle,

unscrew the valve stem cap (retaining cap in

the end of the tool).

NOTE: If the valve stem cap and valve stem

extension unscrew as an assembly, pull

the assembly out of the cap tool end,

remove valve stem cap, insert valve stem

extension into cap tool, and reinstall

valve stem extension onto valve stem

until snug.

Pull off cap tool and re-insert valve stem

cap into end of hose.

5. To check inner dual tire pressure, use the long

handle of the tire gauge to control alignment

and avoid misaligned valve stem deflection.

6. When tire pressure testing is complete,

reinstall the valve stem cap (with the cap still

retained in the cap tool end).

7. Remove cap tool from valve stem cap.

Rear Outer Dual Valve Stem

Access

NOTE: Rear Outer Dual is equipped with a fill-

through extension (no valve stem cap).

1. Obtain a double angle push/pull truck tire

gauge.

2. To check rear outer dual tire pressure, use the

long handle of the tire gauge to control

alignment on the fill-through extension.

Inner

rear

dual

Cap

Tool

18-Hole Steel Wheel with Push-On Full

Wheel Trim

Stylized Chrome Wheels

Questions and Answers:

Need help?

Do you have a question about the Winnebago VIEW 24D and is the answer not in the manual?

Winnebago VIEW 24D Specifications

General