Winterhalter MT Series - Page 21

Software | 4 | English
Operating instructions MT Series | 89014484; Version 1 | 21
Set dosing devices or control signals
Ø For Winterhalter dosing devices, set the type of dosing device.
Ø For dosing devices that are not made by Winterhalter, set the control signals.
Note:A second detergent and a second rinse aid can only be configured if using Winterhalter dosing devices. If
using dosing devices not made by Winterhalter, a maximum of one dosing unit for detergent and one dosing unit for rinse
aid or defoamer can be connected.
Configuring alternative detergents
If using Winterhalter dosing devices, two detergents can be configured and used alternately (e.g. one for dishes and one
for glasses).
Note:You can only configure two detergents if both detergents are configured via the selection “Device”.
The name of the detergent is displayed in the Detergent change menu.