Integrated water softener (optional)
9
7 Integrated water softener (optional)
Softening the tap water prevents the build-up of limescale in the machine and on the dishes. In order for the
integrated water softener to function properly, the salt container must be filled with regeneration salt.
7.1 How do you recognise whether a water softener or partial demineraliser is
installed in your DeMatik Pi-240?
In the machine there is a reservoir for either regenerating salt or DeMatik Pi-240
regeneration agent.
In machines with a water softener installed: grey
In machines with a DeMatik Pi-240 partial demineraliser: orange
7.2 Entering the water hardness
When the machine is installed, the service technician authorised by Winterhalter measures the water
hardness and enters the respective value.
7.3 Lack of salt display
A display on the screen ( 15.1) indicates when an empty salt container needs to be refilled.
The display disappears after topping up the salt container as soon as approx. 3 wash cycles
have been complete and some of the salt added has dissolved.
7.4 Adding regeneration salt
Caution
Only add regeneration salt to the salt container.
This salt should be fine-grained (max. 0.4-7 mm grain size). Salt tablets are not suitable.
Do not add any chemicals, e.g. detergent or rinse aid. These will inevitably cause damage to
the water softener.
Caution
After filling start a wash cycle.
After filling, immediately start a washing programme in order to rinse off any salt residue.
Otherwise there is a risk of rusting in the filling area.
Open the machine door and
remove the washing rack from the
machine
Unlock the bottom rotating wash
field
Remove the bottom rotating wash
field from the machine
To Next Page
Loading...
Need help?
General
