Winterhalter UC Series Operating Instructions

Maintenance and care
23
11.1.4 Cleaning the outside of the machine
 Clean the screen with a damp cloth.
 Clean the exterior surfaces with a stainless steel cleaner and stainless steel polish.
11.1.5 Checking the external water treatment (if available)
 Check whether sufficient regeneration salt has been added.
11.2 Monthly
11.2.1 Cleaning the dirt trap
 Close the on-site water supply stop cock.
 Clean the dirt filter in the dirt trap.
11.3 As necessary
11.3.1 Descaling
If the machine is operated with very hard water and without the appropriate water treatment, limescale can
build up in the boiler, in the interior of the machine and in all lines which carry water.
Limescale deposits and the dirt and grease residue they contain represent a hygiene risk, and the limescale
can cause the heating elements to fail. Therefore, it is essential to remove these deposits at regular
intervals.
You should have the job of correctly descaling the boiler and all pipes which carry water carried out by a
service technician authorised by Winterhalter.
You can descale the interior of the machine yourself using the descaling programme ( 16.6.1).
Warning
When using chemicals, adhere to the safety notes and recommended dosages printed on the
packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
11.4 Maintenance by customer service
We recommend having the machine serviced at least twice a year by a service technician authorised by
Winterhalter. This service should also include having components which are subject to wear or ageing being
checked and replaced as necessary.
Examples of such components:
 Water connection hose
 Dosing tubes
 Door seal
Winterhalter offers a service contract which includes this work and other services.
On the electronic control unit you can program the maintenance interval in operating hours and
set the number of remaining operating hours from which point the symbol for maintenance /
servicing is displayed. ( 18.1). If necessary, open the cleaning opening in the rotating wash field
with a coin and rinse the rotating wash field with water.

Winterhalter UC Series Specifications

General

Model	UC Series
Category	Dishwasher
Energy Consumption	Varies by model and program
Type	Undercounter
Dimensions	Varies by model
Capacity	Varies by model
Wash Cycle Duration	Varies by program
Water Consumption	Varies by model and program
Noise Level	Varies by model
Detergent Dispensing	Automatic
Rinse Aid Dispensing	Automatic
Power Consumption	Varies by model
Dimensions (HxWxD)	Varies by model
Weight	Varies by model
Wash Programs	Standard, Intensive, Short