Winterhalter UC Series Operating Instructions

Controls
14
9.1.3 Screen saver
A screen saver appears if you do not make any screen entries for a
certain length of time when the machine is switched on. The screen
darkens if a further period of time elapses without any entries.
Touch the screen to switch it back on.
INFO: The screen saver does not appear until the machine is filled.
There is no screen saver in the PIN menu ( 16). The times for the
screen saver can be changed by the service technician authorised
by Winterhalter ( 18.1).
9.2 Start button
The start button lights up as soon as you switch on the machine. The different colours indicate the following:
Whilst the machine is being prepared for operation:
Change from red to green: Machine filling, heating up and ready for operation.
Whilst the washing programme is in progress:
Change from blue to green, finally flashes green: Washing programme in progress and is complete.
During the self-cleaning programme:
The start button lights up blue and switches off in 3 steps as the self-cleaning programme progresses.

Winterhalter UC Series Specifications

General

Model	UC Series
Category	Dishwasher
Energy Consumption	Varies by model and program
Type	Undercounter
Dimensions	Varies by model
Capacity	Varies by model
Wash Cycle Duration	Varies by program
Water Consumption	Varies by model and program
Noise Level	Varies by model
Detergent Dispensing	Automatic
Rinse Aid Dispensing	Automatic
Power Consumption	Varies by model
Dimensions (HxWxD)	Varies by model
Weight	Varies by model
Wash Programs	Standard, Intensive, Short