PIN menu
35
16.3 Automatic activation
Here, you can:
enter when the machine is to start filling itself and heating up automatically.
enter a different time for each day of the week (weekly programme).
enter a time for a certain date which is different from the weekly programme. This date takes
precedence over the weekly programme.
Ensure that the machine door is closed, that the customer-side mains disconnector switch is switched on,
and that the water shut-off valve is opened at the moment of automatic activation.
How to program automatic activation:
Enter the PIN menu
PIN 1575
Press the button
Weekly programme
Press button (1).
Use the scroll buttons to select the day of the week
which you wish to program.
Press the button for the day of the week which you
wish to program.
The background of the button turns white.
Enter the time for the start of automatic activation at
the numeric keypad.
Enter the times for the remaining days.
Check whether button (1) is active (white
background). Automatic activation is only active for
the programmed days if this is the case.
Press the back button (3) to save your entry.
Special day
Press button (2).
Enter the time and the date for the start of automatic
activation at the numeric keypad.
Check whether button (2) is activated (white
background). Only then will the automatic activation
start for the programmed day.
Press the back button (3) to save your entry.
INFO: The programmed date takes precedence over the
weekly programme.
INFO: Date and time of the next automatic activation are
displayed when the machine is switched on. Of course the
machine can be used before this point of time.
To Next Page
Loading...
Need help?
General
