Product description
4
Special equipment
Cool (only for glass washing machines)
The washing power of the constantly hot tank water ensures hygienic results. At the end of the wash cycle,
the rinse with cold fresh water ensures the glasses are cooled.
The special benefit: the rinse temperature can be increased at any time. You can always at all times whether
you require cold glasses or wish to optimise drying with a hot rinse.
IMPORTANT: The first wash cycles after activation of the function are performed with hot or warm rinse
water.
Requirement: Machine connection to cold water.
effect (only for glass and dish washing machines)
You use this process to wash at reduced tank and boiler temperatures. Winterhalter detergent and rinse aid
are specially designed for this process and are required for washing at these temperatures.
With the tank and boiler temperatures reduced, you can save energy, which also enables you to reduce your
operating costs. At the same time, the air quality in the room climate is improved in the long-term since less
vapour escapes from the machine when the machine door is opened. The function can be deactivated at any
time.
IMPORTANT: The first wash cycles after activation of the function are performed with hot or warm rinse
water.
Energy
The construction above the machine includes a fan motor and a heat exchanger. After rinsing, the fan motor
draws the moist, warm vapours out of the washing area through the heat exchanger. The cold fresh water
which flows through the heat exchanger for rinsing during the following washing programme condenses the
vapours and is pre-heated. This reduces the energy required to heat the fresh water to the required rinse
temperature. At the same time, the air quality in the kitchen is improved in the long-term since less vapour
(i.e. exhaust) escapes the machine when the machine door is opened.
Requirement: Machine connection to cold water.
To Next Page
Loading...
Need help?
General
