What does 'Param mem header' error mean on WisyCom MCR41?
If your WisyCom Receiver shows an error with the 'Param mem header', this indicates that during the initialization phase, the CRC-16 check of device data (copy1 and copy2) detected an error. Check in the info menu if the Serial take on the ‘UNCAL’ vale. If it does, send the receiver to the Wisycom Repair Centre for recalibration.
What does 'PLL unlocked' mean on WisyCom Receiver?
If the WisyCom Receiver displays 'PLL unlocked', this indicates an error during frequency tuning. The suggested solution is to send it to the Wisycom Repair Centre for repair.
What does 'CH mem header' mean on WisyCom MCR41 Receiver?
If your WisyCom Receiver displays 'CH mem header', this indicates that during the MTK952 initialization phase, the CRC-16 check of RF data (copy1 and copy2) detected an error. The suggested solution is to send it to the Wisycom Repair Centre.
Explains the physical controls, LEDs, and display on the device's front interface.
Details the quick access menu for essential receiver parameters like frequency and group.
Configures the receiver's power-on behavior, including selecting active receiver units.
General| Modulation | FM |
|---|---|
| Audio Frequency Response | 20 Hz - 20 kHz |
| RF Sensitivity | -105 dBm |
| Number of Channels | 4 |
| Channel Spacing | 200 kHz |
| Receiver Type | Diversity |
To Next Page
