Why Witschi ChronoMaster Measuring Instruments show implausible measurement result?
An implausible measurement result from Witschi Measuring Instruments may occur if the watch or clockwork is not correctly positioned. Ensure the watch or clockwork is properly positioned.
General| Functions | beat error measurement |
|---|---|
| Display | Digital LCD |
| Power Source | AC adapter |
| Resolution | 0.1 Hz |
| Dimensions | 100 mm |
| Operating Temperature | +10°C to +40°C |
| Interface | RS-232 |
| Accuracy | ±0.1 seconds/day |
Provides contact details, address, phone, fax, email, and website for customer support.
Provides a general introduction to the ChronoMaster and ChronoMaster Air devices.
Lists all items included in the product package for the ChronoMaster.
Presents detailed specifications, ranges, and resolutions of the device's capabilities.
Describes the different measurement modes available for testing watches with various escapements.
Explains the meaning of symbols and signal words used to indicate hazards and information.
Details potential hazards that could cause damage to the device, cables, or housing.
Provides warnings and instructions regarding the use and replacement of rechargeable batteries.
Guides users through the process of unpacking the device and inspecting for transport damage.
Outlines environmental and positioning requirements for accurate measurement results.
Explains how to install the 'Chronoscope Service' display software on a PC or tablet.
Details the steps for connecting the ChronoMaster device to a PC or tablet via USB.
Explains how to set parameters like beat number, lift angle, and measuring mode.
Guides on properly clamping the watch and initiating an automatic measurement process.
Describes the function of the device's control keys for managing measurements.
Details the correct procedure for powering down the ChronoMaster device.
Covers safe handling practices during transit and storage to prevent damage.
Highlights safety precautions, especially regarding electronics, during maintenance.
Explains the process for replacing the device's rechargeable batteries.
Lists recommended intervals for device cleaning and professional calibration.
Provides guidance on interpreting and resolving error messages from the software.
Advises on actions to take in case of visible external damage or improper repair.
Offers solutions for common operational faults and issues with the device.
Details environmentally sound practices for disposing of the device and its components.
Provides instructions for the proper disposal of rechargeable batteries.
Official statement of compliance with relevant EU directives for the ChronoMaster.
Official statement of compliance with relevant EU directives for the ChronoMaster Air.
To Next Page
