21 VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
WPA Algorithms This item is used to select the security algorithm for encryption of
wireless dhome gateway, options are TKIP, AES, TKIPAES three
Pass phrase Setting up WPA2-PSK security password
Key Renewal Interval Set the key scheduled update cycle, default is 3600s
WPAPSKWPA2PSK
manner is consistent with WPA2PSK settings. WPA-PSK/WPA2-PSK WPA/WPA2 security type
is actually a simplified version, which is based on the WPA shared key mode, higher security
setting is also relatively simple, suitable for ordinary home users and small businesses.
WPA Algorithms The dhome gateway is used to select the wireless security
encryption algorithm options are TKIP, AES, TKIP / AES. 11N
mode does not support TKIP algorithms.
Pass Phrase Set WPA-PSK/WPA2-PSK security code
Key Renewal Interval Set the key scheduled update cycle, default is 3600s
Wireless Access Policy:
Field Name Description
Access policy Wireless access control is used to allow or prohibit the specified
client to access to your wireless network based on the MAC
address.
Policy Prohibition: disable wireless access control policy; allow: only allow
the clients in the list to access, rejected: block the clients in the list
to access.
Add a station MAC Enter the MAC address of the clients which you want to allow or
prohibit
Example: Prohibit the device whose wireless network card MAC address is 00:1F: D0: 62: BA:
FF’s to access the wireless network, and allow other computers to access the network.
Implementation: As shown, the Policy is Reject, add 00:1F: D0: 62: BA: FF to the MAC, click
Save and reboot the device settings to take effect.
To Next Page
Loading...