49 VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
5.5 3-way conference call
Assuming that call party A and B are in conversation. A wants to add C to the conference:
Step 1.Party A dials *77 to hold B, A will hear dialing tone
Step 2.Dial party C’s number, and press # (or wait for 5 seconds) to call C, then A will hear
ringing tone.
Step 3.If C answer the call, A will talk with C firstly
Step 4.If C receive the conference, A press “*88” to add C to the conference, and then A,B and C
are in conference.
5.6 Call Forwarding
Open Phone→Preferences→Call Forward, enable the one call forward mode and fill
forwarded number
WB100A will forward incoming call to the forwarded number according to the settings of
Call Forward and call status
5.7 Speed dialing
Notice: The current firmware does not support speed dial, will be added in new branch firmware.
Set phone number(E.g.3333) in SIP Account→Line 1→Speed Dial, and then save the
changes
Dial*74 to active speed dial function
Then dial 2 to call 3333, and WB100A will dial out immediately.
5.8 Daylight Saving Time
Daylight Saving Time (or summer time as it is called in many countries) is a way of getting more
light out of the day by advancing clocks by some hour during the summer. During Daylight Saving
Time, the sun appears to rise one hour later in the morning, when people are usually asleep
anyway, and sets one hour later in the evening, seeming to stretch the day longer.
Open Administration/Management webpage.
Enable parameter Daylight Saving Time in Time/Date.
Set offset: “-60” means advancing 60min, “60” means delaying 60min.
Set starting Month/Week/Day/Hour in Start Month/Start Day of Week Last in Month/Start
Day of Week/Start Hour of Day, analogously set stopping Month/Week/Day/Hour in Stop
Month/Stop Day of Week Last in Month/Stop Day of Week/Stop Hour of Day.
Press Saving button to save and press reboot button to active changes.
5.9 Upgrade Firmware
Function is to upgrade firmware in local.
Open Administration/Firmware Upgrade webpage
Press to browse a firmware file
Press to start upgrading
To Next Page
Loading...