Operation
22
The display shows the switch-on time that has been
set. The current date and time is displayed, if these are
activated in the basic settings.
The button
P
-blinks. By pushing the
P
button you can
change the switch-on time,
without having to start the
machine.
The machine automatically switches on at the set time.
> In order to manually switch the WMF 1000 S/WMF 1000pro S on in timer mode, briefl y push the off/c
button.
Before the automatically set time, the machine in the timer operation immediately switches on again.
> In order to manually switch the WMF 1000 S/WMF 1000pro S off in timer mode, push the off/c
button for at least 2 seconds.
The machine is switched off and the timer is no longer active.
timer
8:15 1.3.2011
Manual switch on and
switch off for
timer operation
To Next Page
Loading...
