WMF 1000pro S - Hot Water Dispensing; Cancel Beverage Preparation; Tips to Save Energy

Operation
34
3.3.8 Hot water dispensing
You can dispense hot water, for example, for tea, with the help of Hot Water function.
> Place a suitable drinking vessel under the hot water spout.
> Briefl y press the Hot Water button to obtain one glass of hot water.
For obtaining hot water in variable quantities:
> Press and hold the Hot Water button till the desired quantity of hot water is prepared.
3.4 Cancel beverage preparation
You can cancel the current beverage dispense:
> Push the off/c button.
For beverages with more than one component such as coffee and milk:
> Press the beverage button once again to cancel the active dispense.
The next component is dispensed.
3.5 Tips to save energy
> Set the most economical energy saving mode (see “Energy saving mode” on page 15).
> Switch the WMF 1000 S/1000pro S off when it is not being used. Your WMF 1000 S/1000pro S will
not consume any power then.