Care
54
4.2.3 WMF Connect & Clean milk system rinse
The WMF Connect & Clean milk system rinse is unique worldwide; it allows you to easily maintain perfect
beverages with milk and thus, make consistently enjoyable coffee.
Tip: Before switching off, place the milk hose in the hot water spout and start the milk system rinsing by
pushing the button. The machine subsequently switches off automatically.
Hazard!
Possible scalding due to hot rinsing water!
If the milk hose is not fully screwed in it can work loose. Hot rinsing water can come out. After rinsing,
some hot water will remain in the milk hose.
> Always screw the milk hose fully in position.
> After rinsing, hold the open end of the milk hose over the drip tray so that the remaining hot water
can run out.
To Next Page
Loading...
