Display messages
80
5.2 Messages for troubleshooting
The brewing unit is not inserted.
> Insert the brewing unit.
The brewing unit is not inserted.
> Check if the brewing unit is inserted correctly.
The brewing unit is inserted only with diffi culty or not at
all inserted:
> Remove the brewer.
> Open the brewing chamber with the multitool.
> Apply a thin layer of grease from the accessories to the
red gaskets (chapter “4.4.2 Lubricating O-Ring of the
Water tank” on page 76).
(Water tank is empty)
> Fill the water tank.
> Deaerate coffee machine: Dispense hot water until a
constant stream of water comes out.
place brewer
Brewer
brewer pos. switch
clear ow stopped
Flow
To Next Page
Loading...
