WMF 1000pro S - Calling up the Customer; Care Programmes; Warm up Rinsing

Care
53
4.2.1 Calling up the customer care programmes
> Press the care button for longer than 2 seconds.
> Use the care button to scroll to the desired customer
care program.
> Select the displayed program with the
P
button.
Information on the function and application of customer care programmes are give as follows.
4.2.2 Warm up rinsing
The pipes of the coffee machine are rinsed with hot water. The water is drained out via the
All-In-One spout. The warm up rinse is recommended when the machine has not been used for a
considerable period of time (at least 10 minutes) This makes the beverage hotter.
> Call the customer care programs (chapter “4.2 Customer
Care programmes” on page 51).
> Place a collecting vessel under the All-in-One spout.
> Confi rm your selection with
P
.
> Start the rinsing with the care button
select care program
OK: P browse: -/+
Select
care programs
warm up rinsing
OK: P browse: -/+
Warm up rinsing