WMF 1000pro S - Lubricating O-Ring of the Water Tank

Care
76
4.4.2 Lubricating O-Ring of the Water tank
If it is diffi cult to remove the brewing unit and diffi cult to insert it, you must mildly lubricate the O-Ring
with the WMF “Gasket grease”.
> Open the lid of the brewing unit (3).
> Release the lock (3a) and lift the brewing unit from the brewing chute (3b).
> Mildly lubricate the O-Rings (3c) in the brewing chute with the WMF “Grease for gasket rings”.
> Make sure that no grease gets into the holes.