23
User Manual WMF1100 S
Start-up | Installation location
3.1 Installation location
• The installation location must be dry and
protected against water spray.
• Some condensate, water, or steam can always
be discharged from acoffee machine.
> Do not use the coffee machine outdoors.
> Set up the coffee machine so that it is
protected against water spray.
> Always place the coffee machine on awater-
resistant and heatproof base in order to
protect the installation surface against
damage.
3.2 Unpacking
> Packaging material in the box contains
accessories. Do not throw away.
> Accessories are packed in the water tank and
the coffee grounds container. Remove the
accessories prior to start-up and rinse the
coffee grounds container and water tank
thoroughly.
> Make sure that the coffee machine is intact.
In case of doubt, do not start up the coffee
machine, and inform the WMFService.
> Retain the original packaging in the event of
any subsequent return.
Double powder hopper (optional)
The optional double powder hopper is shipped
in aseparate package. If the coffee machine is
equipped with this option, the double powder
hopper must be installed before commissioning
the coffee machine. Operation without
ahopper installed is not permitted.
IMPORTANT
Follow the Warranty chapter
w starting on page 107
Technical data
w starting on page 108
IMPORTANT
Follow the Warranty chapter
w starting on page 107
Accessories and identification
ofcoffee machine parts
w page 18
Technical data
w starting on page 108
Unpacking
IMPORTANT
Follow the Warranty chapter
w starting on page 107
Technical data
w starting on page 108