WMF 1120 Series User Manual

40
User Manual WMF1100 S
Software | Ready to operate
5.2 Ready to operate
“Ready to operate” display
The display shown when “Ready to operate” depends
on the individual settings and options of the coffee
machine.
5.2.1 “Ready to operate” display pads
Beverage buttons
All beverage buttons that are ready to dispense are
illuminated.
Swiping the display vertically brings up the rest of the
beverages that are available for dispensing. Beverage
dispensing starts when the desired beverage button is
touched.
“Warm rinse” pad
 Touch the “warm rinse” pad
A rinse of the pipes with hot water starts. The water
warms the brewing system and guarantees an
optimum coffee temperature.
Recommended after alonger brewing pause, especially
before dispensing acup of espresso.
Barista pad - coffee strength
Display Coffee strength
standard 2beans normal, as per setting
touch 1x 3beans 15 % stronger than the setting *
touch 2x 1bean 15 % weaker than the setting *
* Maximum quantity of ground coffee 15g per
brewing cycle
The coffee strength will be altered for the next
brewing cycle only.
Button layout
w Operating options
page 54
espresso
Touch the desired beverage button
Espresso
Cappuccino
Café Crème Latte Macchiato
Ristretto Milk coffee
DI_05_01_00_00
Example: cappuccino button
“Warm rinse” pad active/inactive
w Operating options
page 52
Barista pad active/inactive
w Operating options
page 51

WMF 1120 Series Specifications

General

Brand	WMF
Model	1120 Series
Category	Coffee Maker
Language	English