WMF 1200F - Determine the Water Hardness; Constant Water Supply; Drain Connection; Grounds Container

16
User Manual WMF1200F
Start-up
3.2.1 Determine the water hardness
 Request water hardness reading from water
supplier, or determine using WMFcarbonate
hardness test (complete with instructions) in the
accessories
The unit used is the “Deutsche Karbonathärte” = °dKH
3.3 Constant water supply
 Carefully insert the seals attached to connecting
tube
 Connect the rear connection of coffee machine
and the on-site water tap or water filter with the
connecting tube
Read and follow water filter instructions.
 Check connections for leaks and tighten if
necessary
 Turn on water
3.4 Drain connection
 Push drain tube with angle piece onto water drain
connection onto rear of machine
 Connect drain tube to mains drain via an S-trap
Tube must not sag.
 Shorten hose if necessary
3.5 Grounds container
 Push combi spout all the way up
 Remove the grounds container and any accessories
 Insert the grounds container until it stops