WMF 1200F - Audio Signal; SB Mode (Self-Service Mode); Display Contrast; Backup

37
User Manual WMF1200F
Settings | Basic settings
5.3.8 Audio signal
 Confirm the desired setting with
5.3.9 SB mode (self-service mode)
When set to yes , the functional pads are not
displayed.
Recommended for self-service.
 Confirm the desired setting with
The functional pads are displayed again by touching
and holding (at least 3seconds) the unilluminated
Ppad .
5.3.10 Display contrast
Display contrast is set here.
 Confirm the desired setting with
5. 3 .11 Backup
If set to yes , all basic settings and all beverage
settings are reset to the factory settings.
 Confirm the desired setting with
audio signal: on
OK: P change: -/+
DI_04_04_19
SB mode: no
OK: P change: -/+
DI_04_04_20
display contrast
OK: P change: -/+
DI_04_04_21
backup: no
OK: P change: -/+
DI_04_04_22
Instructions
All individual settings are lost if you
reset to the factory settings.