32
User Manual WMF1200F
Settings | Change recipes
5.2.2 Water volume
Example: touch until the water volume is
increased to 37ml
Each beverage setting can be tested during
setup.
Place asuitably sized cup under the combi spout
Press the beverage button again
Test the beverage
As soon as the beverage is set as desired, confirm
with
5.2.3 Ground coffee
The grinding quantity varies depending on the grinding
degree set, the type of coffee used, the humidity and
various other factors.
Determine the desired coffee strength with
adispensing test.
As soon as the beverage is set as desired, confirm
with
water volume: 37 ml
OK: P change: -/+
water volume: 37 ml
OK: P test: beverage
TIP
water volume: 37 ml
OK: P change: -/+
coffee strength: 86%
OK: P change: -/+
For acup of coffee, the factory
setting at 100 % corresponds to
agrinding time of xx seconds.
Approximately xx grams of coffee
are ground per second.