WMF 1200F - Finalizing Start-up

20
User Manual WMF1200F
Start-up
Burn hazard. Scalding hazard.
• When dispensing beverages, hot liquid comes
out of the spouts. The adjacent surfaces and
spouts become hot.
> When dispensing beverages, do not reach
beneath the spouts.
> Do not touch the spouts immediately after
dispensing.
Start-up complete
A brewing test is performed following the end of
the start-up program.
The beverage button flashes.
 Place asuitably sized cup under the combi
spout
 Press the flashing beverage button
Brewing test starts.
The coffee grinder will be filled with coffee beans
during the brewing test.
 Discard this first cup of coffee
your selection pls
08:15 13.11.2013
DI_02_09_12
The coffee machine is now ready for use.
Start-up is complete. All settings can be changed
now, or at alater time.
Setting options
• Cup volumes (Cup size) w page 30
• Change recipes w page 31
• Set grinding degree w page xxx
• Basic settings w page 34
CAUTION
Observe the Safety chapter
w starting on page 6