WMF 1300 S - Page 36

36
User Manual WMF1300S
Operation | BasicSteam (optional)
4.8 BasicSteam (optional)
Burn hazard/scalding hazard
• When dispensing beverages and steam, hot
liquid comes out of the spouts. The adjacent
surfaces and spouts become hot.
• Hot water and steam may escape from the
outlets in the heating-up phase.
> When dispensing beverages and steam, do not
reach beneath the spouts.
> Do not reach beneath the spouts during the
heating-up phase.
> Do not touch the spouts immediately after
dispensing.
> Always place an appropriate cup under the
combi spout before dispensing abeverage.
Note
The dispensing option for steam can be set
under the “Beverages” menu item.
The available dispensing options are Start-Stop,
metered, free-flow, and Start-Stop freeflow.
The dispensing options are described in the
Beverages chapter.
 Press the steam button
Steam is dispensed for as long as the steam button
isheld.
• Steam warms beverages
• Steam manually foams milk
CAUTION
Follow the Safety chapter
w starting on page 5
NOTE
Dispensing option
w Software
w Beverages
page 54