WMF 1300 S - Ready to Operate Display; Beverage Buttons; Function Bar; Steamjet Pad

48
User Manual WMF1300S
Software | “Ready to operate” display
5.2 “Ready to operate” display
The display shown when “Ready to operate” depends
on the individual settings and options of the coffee
machine.
5.2.1 Beverage buttons
All beverage buttons that are ready to dispense are
illuminated.
Depending on the button layout selected, avertically
swipe on the display can bring up additional beverages.
Beverage dispensing begins once the desired beverage
button is touched.
5.2.2 Function bar
SteamJet pad
For heating cups.
“Warm rinse” pad
 Touch the “Warm rinse” pad
A rinse of the pipes with hot water starts. The water
warms the brewing system and guarantees an
optimum coffee temperature.
Recommended after alonger brewing pause, especially
before dispensing acup of espresso.
Cup size adjustment
For selecting beverage size for the next beverage.
Espresso
Cappuccino
Café Crème Latte Macchiato
Ristretto Milk co󰀨ee
1300S
DI_02_01_00_00
Example: Cappuccino button
Button layout
w Operating options
page 63
SteamJet pad active/inactive
w Operating options
page 61
“Warm rinse” pad active/inactive
w Operating options
page 61
Cup size adjustment
w Operating options
page 62