WMF 1300 S - Milk System Check; Progress Display; Display and Illumination

75
User Manual WMF1300S
Software | System
Milk system check
The milk system check is started here if the output
quality is not consistent, that is, if the milk or milk
foam quality does not match the settings.
Progress display
Options: Line, circle, off
Default value: Circle
Display and illumination
The display and illumination are set here.
Spout illumination
Options: • active
• inactive
Default value:
active
Illumination when “Ready to operate”
The illumination color is set here.
Set the desired color from the color circle above the
triangle. The color can also be defined and set by
means of RGB values.
There are also the following options:
• Slow color change
• Standard color change
• Quick color change
• Off
The current setting is displayed immediately.
DS_03_11_00_17
Milk system check
DS_03_06_01_08
Progress display
DS_03_11_00_02
Display and illumination