WMF 1300 S - System; Milk and Foam; Milk Storage Temperature; Hot Foam Proportion

74
User Manual WMF1300S
Software | System
5.10 System
Milk and foam
The central generic values for milk and milk foam are
set here. These values apply to all existing recipes.
If special values for milk and milk foam are set in the
recipes, they retain their validity and are not modified.
Milk storage temperature
Enter the milk storage temperature here.
For example, < 50°F(10°C) when using Cup&Cool.
Hot foam proportion
Options: very little, little, middle, much, alot
Default value: middle
Empty message
(Cooler with low-level warning function is required)
This setting determines whether amilk empty message
will be shown.
The empty message can be coupled with abeverage
lockout. This is especially important for self-service
mode, so that paid beverages are guaranteed to be
dispensed completely.
Temperature sensor
(Cooler with sensor required)
The milk temperature is measured.
DI_system
DS_03_11_00_01
Milk and foam