WMF 1300 S - Page 43

43
User Manual WMF1300S
Operation | Drip tray/drip tray sensor
4.16 Drip tray/drip tray sensor
Scalding hazard
• The drip tray may contain hot liquids.
> Be careful when moving the drip tray.
> Replace carefully so that no water
accidentally drips down.
On coffee machines with adrain connection the
drip tray may also be removed (e.g. for cleaning).
Drip tray sensor
A sensor monitors fill level and whether the drip tray
has been inserted.
The coffee machine will indicate on the display when
the maximum fill level is reached.
 After the display message appears, remove the
driptray carefully, empty it, and then reinsert the
drip tray
The underside of the drip tray and the area
around the drip tray sensor must be dry before it
is replaced. The sensor is on the left, underneath
the drip tray. If there is residual moisture in this
area, the message, “Empty drip tray” appears
again.
CAUTION
Clean drip tray daily
Care
w starting on page 87
NOTE
IMPORTANT