WMF 1300 S - Page 98

98
User Manual WMF1300S
Care | Manual cleaning
 Reach into the chute below the brewing unit with
one hand, releasee the catch, and hold it
 Slowly guide the brewing unit downwards, tilt and
pull forward (illustration1)
 Remove the brewing unit and hold firmly
(illustration2)
Use the multitool from the accessories.
 Switch the thread on the brewing unit head
counter-clockwise (illustration3) until the scraper is
in the forward position
 Pull the springs outward and press them down
This unlocks the insertion chute.
 Swing the insertion chute[1] upwards
 Clean the brewing sieve under running water or
with acloth
 Remove coffee grounds residue using apaint-brush
or scrubber
 Rinse the brewing unit under running water
Illustration 1
Illustration 2
Illustration 3
1
Illustration 4