WMF 5000 S+ - Page 114

114
User Manual WMF5000S +
Appendix: Technical data
Installation clearances For operating, service, and safety reasons the
machine should be installed with aclearance
from the building or non-WMFcomponents of
not less than 1.97in (50mm) at the sides and
1.97in (50mm) at the back.
A minimum working space of 31.50in (800mm)
in front the coffee machine and overhead
clearance of at least 7.87in (200mm) above
the product hoppers are recommended. Aclear
height of 43.31in (1,100mm) from the top of
the supporting surface should be ensured. The
height of the installation surface above the
floor is at least 33.47in (850mm). If the coffee
machine connections are to be run downwards
through the counter, please make space for the
lines, which can reduce the usable space below
the machine.
Installation dimensions of the
water filter
See the User Manual for the water filter.
We reserve the right to make technical modifications.