WMF 5000 S+ - Clean the Auto Steam Outlet

93
User Manual WMF5000S +
Care | Manual cleaning
 Remove the powder hopper and clean the loading
chute to the mixer bowl with acloth or brush
 Allow the parts to dry completely[1]
On re-assembly, all openings must face in the
same direction.
 Insert the propeller part[2] as shown in the
illustration
The green side should be visible after insertion.
 Attach mixer hose on the mixer bowl
 Replace mixer bowl until it engages in the lock
 Attach mixer hose on the combi spout
5.4.8 Clean the AutoSteam outlet
Burn hazard/scalding hazard
• When dispensing beverages and steam, hot
liquid comes out of the spouts. The adjacent
surfaces and spouts become hot.
• Hot water and steam may escape from the
outlets in the heating-up phase.
> When dispensing beverages and steam, do not
reach beneath the spouts.
> Do not reach beneath the spouts during the
heating-up phase.
> Do not touch the spouts immediately after
dispensing.
> Always place asuitable cup under the spout
when dispensing.
1
2
CAUTION
Instructions
w Main menu
w Care
w Instructions