WMF 5000 S+ - Logo

59
User Manual WMF5000S +
Software | Operating options
Logo
Manufacturer's logo
Options: • active
• inactive
Default value:
active
active The manufacturer's logo is shown at the top
right of the “Ready to operate” display.
Customer’s logo
Options: • active
• inactive
Default value:
inactive
active When the option is set to “active” and
acustomer’s logo has been downloaded,
the customer’s logo is shown at the center
of the header bar when “Ready to operate”.
Whenthe vending devices are connected it
shows the customer’s logo. In this case, both
logos cannot be displayed.
Load customer's logo
Insert the USB stick containing the customer’s logo.
Load the customer’s logo.
Size of customer’s logo
The logo must not be greater than 80pixels high.
Larger logos will be scaled to this size automatically.