WMF 5000 S+ - Nutritional Information; Cup Detection

74
User Manual WMF5000S +
Software | System
Nutritional information
Detailed information on about nutritional values and
ingredients can be captured here for each grinder,
portioner, milk, and milk foam.
An overview is available.
Cup detection
The cup sensor detects whether there is areceptacle
beneath the spout and determines its height.
Correction of spout position
Setting range: -0.78inch (20mm)
to +2.36inch (60mm)
Minus gSmaller distance from cup
Plus gGreater distance from cup
Steps: 0.20inch (5mm)
Standard: 0.40inch (10mm) to 0.59inch
(15mm) distance
Cup height tolerance
The tolerance for cup height is set here for beverages
with inactive S-M-L.
The height for arecipe is set in the beverage menu.
Thetolerance set here determines how precise this
height must be in order to enable the beverage.
The required tolerance is thus entered here.
Setting range: 0inch/mm to ±1.18inch (30mm)
Steps: approx. 0.30inch (7.5mm)
Nutritional information
DS_04_10_12
Cup detection
DS_04_10_14