WMF 5000 S+ - Progress Display; Display and Illumination

68
User Manual WMF5000S +
Software | System
Progress display
Options: Line, circle, off
Default value: Line
Display and illumination
Illumination
The illumination color is set here.
Set the desired color from the color circle above the
triangle. The color can also be defined and set by
means of RGB values.
There are also the following options:
• Slow color change
• Standard color change
• Quick color change
• Off
The current setting is displayed immediately.
Illumination when “Ready to operate”
• Standard color side
Event display (message)
Options: • active
• inactive
Default value:
inactive
active The illumination during amessage can be
adjusted.
Illumination for messages (event)
• Event color side
Progress display
DS_04_10_02
Display and illumination
DS_04_10_03
For example, “Beans empty”
message.