WMF 5000 S+ - Grinding Degree Setting; Brewing Pressure Display; Portioner; Bluetooth (Optional)

72
User Manual WMF5000S +
Software | System
Grinding degree setting
The grinding degree can be adjusted from the display.
• Grinding degree grinder 1
• Grinding degree grinder 2
Lower number -> finer grinding degree
Higher number -> more coarse grinding degree
The setting has intervals of 0.25. Up to half agrinding
degree can be adjusted in each step. The grinder must
be run between each adjustment.
Only for trained personnel and service.
Brewing pressure display
The brewing pressure display can be activated here.
Options: • active
• inactive
Default value:
inactive
Portioner
The names of the beans and powders used can be
saved here.
Espresso or Café Crème are the default options
available.
Bluetooth (optional)
The optional WMFBluetooth stick is required for this
function.
Options: • active
• inactive
Default value:
inactive
 Set Bluetooth to active here
 Open the operating panel
 Insert the WMFBluetooth stick on the back side of
the operating panel
 Switch the coffee machine off and on again
Grinding degree setting
DS_04_10_07
Brewing pressure display
DS_04_10_15
Portioner
DS_04_10_16
Applies to machines with two
grinders and one powder hopper.
Bluetooth
DS_04_10_17