WMF 5000 S+ - Manual Cleaning; Clean the Operating Panel (Cleanlock)

88
User Manual WMF5000S +
Care | Manual cleaning
Replace the filter after 100brewing cycles/72hours.
 Start the Care menu
 Touch FFC lter change
The display-guided instructions are launched.
 Follow the instructions on the display
This menu shows how many more drinks can be
dispensed via this filter and how many hours remain
before filter replacement is due.
5.4 Manual cleaning
5.4.1 Clean the operating panel (CleanLock)
 Touch CleanLock
A 15-second countdown starts.
The touch display can now be cleaned.
The touch display is activated again 15seconds after
the last time it was touched.
Scalding hazard
• If abeverage is initiated accidentally, there is
ahazard of being injured.
> Always lock out the touch display with
“CleanLock” before cleaning.
• There is arisk of causing scratches or scoring.
> Clean the display with aclean, damp cloth.
Do not use any cleaners or implements.
> Use soft cloths for cleaning.
> We recommend adamp microfiber cloth.
Order numbers for the WMFcare
program
w Accessories and spare parts
page 116
CAUTION
Follow the Safety chapter
w starting on page 5
IMPORTANT
Follow the Warranty chapter
w starting on page 111