WMF 5000 S+ - Espresso Pump Operation and Pressure Setting; Espresso Pump Critical Safety Notes

15
User Manual WMF5000S +
Safety
1.3 Conditions for use and installation
Risk of fire and accidents
> The conditions for use and
installation listed in the “Technical
Data” chapter must be met.
> Before inserting the device plug,
ensure that the information on
the rating plate matches the mains
voltage for the installation.
WARNING
Technical data
w page 112
Any necessary on-site preparatory work for
electricity, water, and drainage connections
at the customer‘s premises is to be arranged
by the machine owner/operator.
The work must be carried out by authorized
installation technicians in compliance
with general, country-specific and local
regulations. The WMFService engineers must
only connect the coffee machine to existing
prepared connection points. WMFService
is neither authorized nor responsible for
carrying out any on-site installation work
prior to connection.
The device must only be connected and
commissioned by WMFService.
NOTE
The device is to be installed to
comply with applicable federal,
state or local plumbing codes.
This includes sufficient backflow
preventers.