WMF 5000 S+ - Service Maintenance 2 Details

38
User Manual WMF5000S +
Software | “Ready to operate” display
4.2 “Ready to operate” display
The display shown when “Ready to operate” depends
on the individual settings and options of the coffee
machine.
4.2.1 Beverage buttons
All beverage buttons that are ready to dispense are
illuminated.
Depending on the button layout selected, ahorizontal
swipe on the display can bring up additional beverages.
Beverage dispensing begins once the desired beverage
button is touched.
4.2.2 Function bar
Hot water button
Hot water button for hot water dispensing.
Depending on the settings, touching this hot water
button brings up aselection of three dispensing
temperatures in two beverage sizes each.
A beverage button can also be assigned for hot water.
SteamJet pad
For heating cups.
Cappuccino
DI_04_04_00
Example: Cappuccino button
Button layout
w Operating options
page 56
SteamJet pad active/inactive
w Operating options
page 54