WMF 5000 S+ - Page 97

97
User Manual WMF5000S +
Care | Manual cleaning
 Unscrew union nut at front and rear
 Pull out the dosing auger
 Thoroughly wipe out hopper with adamp cloth
 Thoroughly clean individual dosing auger
components
 Allow powder hopper and individual components to
dry completely
 Re-assemble and replace the dosing auger and
screw on union nuts
Ensure correct orientation of discharge.
 Refill and replace powder hopper
 Turn the lock 180° to relock it
Portioner with individual parts.
Dosing auger
IMPORTANT